Did we help with your project? Buy us a Cup of Coffee!

No Slip Adventures 1 by William

Time for a new upgrade in the truck. People put things on my dash all the time and they slide off in a turn. You would think they would learn, but they just keep doing it. So, lets fix them. I’m going to try and come up with a few more uses for this material I bought, so stay tuned for more No Slip Adventures.

DshQkStc_001Grip it, or whatever. I chose this at Harbor Freight, cause it was cheep, and it was really thick!!!!!! I’m not much for this type, cause of the holes, but I figured it would work better in the truck. It was 6.50, which is a bit high, but this product really impresses me.

 

 

DshQkStc_000

Here is our culprit, the dash. Just a smoothish plastic surface. The turtle is the old system for turning the black truck. If it slides out of the center, then I’m turning to fast, or hard. Well, with the new truck, that system doesn’t work. Even as much as I like putting everyone’s junk that is on my dash on the floor I decided to be nice and fix the situation.

Wow, I must have got into this project, lets fast forward past the whole cutting process (which I forgot to take pictures of.)

DshQkStc_007

You can see the tools I used for this project in the picture. Scissors, a knife, and some scotch tape, because I did not have any two sided tape.

Luckily the roll was as wide as the part on the right, so I just had to cut out a small section. I found out the pattern on the mesh was not square with the length, but I made it work. I set the piece in place, and used the knife to try and get a general shape, cutting it, but not to hard so I didn’t damage the dash. The scissors cleaned it up after that.

DshQkStc_002DshQkStc_003 

I took a strip of tape the width of the .. well, I guess you could say length, but whatever. and then rolled it to make some double sided sticky tape.

DshQkStc_004 DshQkStc_006

I stuck it in place, and it is currently holding. I did this 3 times on the long piece, and only 2 times in the center. Double sided tape would work much better in this situation, and the dash is textured enough that the tape is easily removable and replaceable or what not. The material used is washable by hand, so if something was to spill on it, this is cleanable! Well, I hope this gives you some idea’s for your own vehicles. this material is holding up great for the last 4 days. The turtle is sort of stuck to it. So it is definitely some good material.

2 comments:

Brett said...
on

Then you can take a slice of the "s-crotch" tape and fix that crack in the dash! :-)

I got some called 'Good Ole Values Anti-Slip Mat' got it at the $1 store. Come to think of it, wonder if they sell mats that make things slip... Anti-Anti-Slip mats...

Anonymous said...
on

What a great idea....
Can I now put my bare feet up there without my legs doing the splits on the corners?
Comment from Spring Hill.
Smooches to ya all...

Find It